ADWOC Rig 5
Type Milson Mogul “42”B Model L.C. Double Drum Back-in Minchmobile with 6 Mheel Drive.
1. MAST
Model 112-300 Telescoping Mast, open faced with integral crown block for 8 line string up with net hook capacity with 8 lines of 300,000 lbs.
Clear Height ……. 112 Feet
Rate Capacity ……. 300,000 Lbs.
Racking Capacity ……. 13,400 Feet 3-1/2” Drill Pipes and 12 Stands 4-3/4” Drill Collars
Racking platform capacity for 22,000 ft. of 2-7/8 tubing or 13,400 ft. of 3-1/2 D.P. plus twelve stands 4-3/4 Drill Collars, adjustable to two heights.
2. SUBSTRUCTURE
Ramp type substructure with Telescoping floor from 12 ft. to 16 ft. at 12″ increments with adjustable drive compound from carrier to rotary table.
Rotary capacity ……. 300 Ton
Set back capacity ……. 250,000 Lbs.
3. DRAWWORKS
Milson Mogul 42-B Model L.C. Double drum with 5 forward and one reverse to both drums and rotary:
Parkersburg 22″ Hydrotarder.
Both drums with Lebus grooving
Koomey Crown-O-Matic air actuated toggle valve on drum Hydraulic Breakout and Spinning Catheads (2)
Models HC4-4 rated 20320 Feet Lbs. line pull
4. DRIVE GROUP FOR DRAWWORKS
Caterpillar Model 3408-Dita Diesel engine
Rated ……. 475 HP @ 2,100 RPM Driving Allison Model CLBT-5861 torqumatic transmission.
5. CARRIER MOUNTED WINCHES
No. 1 Braden hydraulic winch Model PD12A-36045 Rated at 6,000 Lbs.
No. 2 Braden hydraulic winch Model PD12A-36064 Rated at 6,000 Lbs.
6. MUD PUMP (INCORPORATED ON MUD SYSTEM TRAILER)
Continental Emsco Triplex Model F-500
for 6-3/4 dia liner size 7-1/2” stroke single acting
Powered by 2 x Caterpillar 3406 diesel engines rated 355 HP each.
7. MUD SYSTEM (TRAILERIZED) Active Tank 438 bbl Reserve/Mater Tank 822
8.AIR COMPRESSOR
Sullair Model LS-100-30H/A
9. SOLIDS CONTROL EQUIPMENT
Shale Shaker
Rumba Model 4860-SUSI Maximum flow rate 600 GPM
10.TRAVELLING BLOCK I HOOK
Milson Model M-436-MM 150 Ton 4 x 36” Sheaves for 1” wireline.
11.SWIVEL
Continental-Emsco LB 140, 140 ton
12.ROTARY TABLE
Continental-Emsco T-1750-44 Rotary Table with 17-1/2 opening split drilling bushings.
13.HANDLING TOOLS – Rig has all relevant tools for normal tubular
14.SAFETY EQUIMENT – Adequately
15.BLOWOUT PREVENTER EQUIPMENT
One (1) Shaffer 7 1/16” 5m Spherical Blowout Preventer, studded top, flanged bottom. One (1) Shaffer Type LMS 7 1/16” 5m Double Blowout Preventer, flanged top & bottom.
Drilling Spool 7-1/16 5,000 PSI M.P.
Mith 2 x 3-1/8 Flanged outlets 20″ overall length for H S service.
Choke Manifold 5,000 PSI M.P. H2S Service
Barton Gate Valves 3-1/8 5,000 PSI
Barton Gate Valves 2-1/16 5,000 PSI
H2S Certified SMACO super choke 10,000 PSI M.P. with remote operating console.
Accumulator
NL Shaffer Model T10060-3S Blowout Preventer Control Unit 3,000 PSI working pressure accumulator control system.
16.RIG SITE UTILITES – Offices/bath/sleeper facilites for Company man and
17.MAIN CAMP – Fully equipped Camp and Facilites for 36
18.AUTOMOTIVE EQUIPMENT – One 953 Kenworth or equivalent, one forklift Cat 966, one crew car, & two pick-up.