ADWOC RIG 8 2017-11-05T11:21:03+00:00

ADWOC Rig 8

1.MAST

Dreco Two Section Free standing telescoping Mast

Total Height from ground level 109′ Leg spread     …. 8′

Gross Nominal Capacity                                               …. 300,000 lbs

Max. Hook Load 8 lines                                                …. 270,000 lbs

Racking Capacity                                                            …. 17,000 2-7/8″ tbg in doubles

Standard Crown 8 line string up main sheaves grooved for 1″ wireline.

2. DRAWWORKS / SUBSTRUCTURE  – CARRIER BACK IN TYPE DRAWWORKS

Dreco Model D-475 Double Drum Drawworks with 5 forward and one reverse to both drum and rotary.

Hydrotarder  –  Parmac V-122

Sand Reel capacity for 10,000 Ft. 9/16″ Wireline

Both Drums with Lebus grooving

Superior Crown Safety Device (Crown-O-Matic)

Hydraulic Breakout & Make up Cathead – Drilco EZY Torque

Hydraulic Cathead Type II

Planetary Winch – Model M10-3-50-1 Pull Master

Catheads with Rope and Safety Guards

SUBSTRUCTURE – Carrier Mounted

Adjustable Hydraulically from 12′ to 16′ with folding Stabilizer pads

Gross loading                                                              …. 300,000 Lbs

3. ROTARY TABLE

Dreco Model 175 Rotary Table with 17-1/2″ opening

Max. Rated capacity                                                   …. 300 Ton

Max. Table Speed                                                        …. 350 RPM

4MUD PUMP – CARRIER MOUNTED

Oilwell A 600 PT. 7 x 8 Single Acting Triplex Mud Pump.

Nominal Horse Power Rating                                               …. 600 – 150 SPM

Liner size maximum by stroke                                              …. 7″  x  8″

with K10-5000 Pulsation Dampner, and Demco 3″ Shear Relief Valve.

5. DRIVE GROUP FOR DRAWWORKS AND MUD PUMP

Two Caterpillar model 3408 DITA Diesel Engines rated at 475 HP each at 2,100 RPM. Compound Dreco Model HVA-750 Drive, three shaft to allow either engine to be run independently. Transmission Allison 6061 Complete with Drop Box to supply power to Carrier

6. TRAVELLING BLOCK / HOOK COMBINATION

Dreco Model 430D-150 Block / Hook rated 150 Ton, 4 Sheave, 1″ Grooved, 30″ Diameter

7. SWIVEL

Continental Emsco LB140 Swivel, 140 Ton capacity, 4-1/4″ I.D. wash pipe 3″ threaded Gooseneck with wireline opening.

8. POWER SWIVEL BOWEN – HDS-2

Rated 85 Tons at 136 RPM

Torque 3400  Lb/Ft

Connections 2-7/8  IF

Gooseneck 2-1/2  NPT

9. POWER SUB BOWEN MODEL PS60

Capacity 2,000 PSI and 2,415 Ft. Lbs. Max. Torque output.

10. MUD SYSTEM

Skid Mounted (2) Two Tank System with total capacity of 750 Bbls.

Active System comprises of  :

190 Barrel Suction Tank

50 Barrel Pill Tank

10 Barrel Sand Trap

Shaker Mounted on Tank

One 500 Bbls. Tank with Agitators and Submersible Guns with 5 x 6 Centrifugal Pump and Low Press System. This can be used as active system or reserve.  Fluid can be mixed, circulated or discharged from either tank.

11. SOLIDS CONTROL EQUIPMENT

Rumba Shaker Model 2760-JR Single Shale Shaker rated 600 GPM.

Mud Mix Hopper Assembly Dreco Manual Bottom Mount Mud Mix Pump 5′ x 6′ Mission Magnum, explosion proof manifolded to supercharge Pump 5 x 6 Mission Magnum, Manifolded to maintain adequate flow in the event of mechanical failure of either pump.

12. DEGASSER

Dreco manufacture, Poorboy Type

13. WATER TANK, SKID MOUNTED

Capacity 580 Bbls., with 1-1/2″ x 2″ Mission Pump

Size 28-1/2″  x  12′  x 9-1/2″

14.GENERATOR HOUSE

Skid mounted, size 23-1/4″ x 12′ to accomodate Generator and Compressor room containing:

One (1) Caterpillar 3406 Dita Diesel Engine with KATO Generator Model A226340005, 200 KW

One (1) Leroi Cold Start Air Compressor

One (1) Leroi Electric Compressor, Double Decked Air Receiver, mounted.

One (1) Diesel Fuel Tank, 100 Bbls. capacity

One (1) Workshop, 8-1/4 long, 12′ wide.

Generator House and Water Tank cross mounted on Master Skid 32′ x 10′.

15. UTILITY / KOOMEY SKID

Consisting of Koomey Control Unit, work area, Dog house 13′ 6″ x 12′, 16 Bbls. Lubster Divided, overall skid 36′ 6″ x 10′.

16. BOP EQUIPMENT

Annular Blowout Preventer Hydril GK.

7-1/16″  5,000 PSI WP with 7-1/16″ PSI flanged bottom, vertical bore H2S trim.

Double Gate Blowout Preventer, Cameron Type U 7 1-//16 x 5,000 PSI vertical bore with H2S Trim Manual Lock.

Ram Assemblies :

1 Set 1/16 7 –     5,000   x    Blind Csg.
1 Set 1/16 7 –     5,000   x    3-1/2″
1 Set 1/16 7 –     5,000   x    2-7/8″
1 Set 1/16 7 –     5,000   x    2-3/7″
1 Set 1/16 7 –     5,000   x    4-1/2″
1 Set 1/16 7 –     5,000   x    5″
1 Set 1/16 7 –     5,000   x    5-1/2″

 

17. KOOMEY WORKOVER UNIT

Equipped with :

One air operated Hydraulic Pump

One Electric drive Hydraulic Pump with explosion proof motor.

18. CHOKE MANIFOLD

McEvoy Carrier Vertical side mounted Manifold, Reverse / Kill – Workover.

Also Choke Manifold Skid Mounted

Cameron 5m, Pressure Rating 3″ full through

Two Adjustable 2″ Chokes

Flare line outlets – (2) Two

Return line outlet to Mud Tank (1) one with mounted Poor Boy Degasser rated at 800 GPM.

Adapter Spools, Cameron

7-1/16 x 5,000 R46   x 7-/16″ x   3,000 R45 Flanged
7-1/16 x 5,000 R46   x 11″ x   5,000 R54 Flanged
7-1/16 x 5,000 12″ x   3,000 R57 Flanged
7-1/16 x 5,000 R46   x 7-/16″ x   5,000 R46 Spool

with Two (2) 4″ 5,000 PSI R39 Flanged outlets

KELLY

Drilco 3-1/2 x 40 ft. Hex Kelly 3-1/2 IF Pin Down 37′ working space

KELLY COCK

Omsco 6-5/8 Upper Kelly Cock 10,000 PSI working pressure

LOWER KELLY VALVE

TIW 10,000 PSI.

HYDRIL KELLY GUARD 5,000 PSI

HANDLING TOOLS

POWER TONG

Foster – Size Range 1.66″ thru 5-1/2″ 15,000 Lbs. Ft. Torque

TONGS

2 x BJ Type C     2-3/8 ” to 7″

ELEVATORS

BJ   for   2-7/8 if 18º Tapered Tool Joint

BJ   for   2-3/8 if 18º Tapered Tool Joint

BJ   for   3-1/2 if 18º Tapered Tool Joint

BJ   for   2-3/8 EUE  Tbg Centre Latch

BJ   for   2-7/8 EUE  Tbg Centre Latch

BJ   for   3-1/2 tbg.

BJ   for   4-1/2 tbg.

BJ   for   5″ Csg

BJ   for   4-3/4 DC’s Ziplift

Plus other related handling tools to accomodate Operator’s tubulars

CAVINS TYPE C

Air operated Tubing Spider for 2-3/8, 2-7/8 and 3-1/2 Tubing.

Type C    Baash Ross Safety Clamp  –  Range 4-1/2″ – 5-5/8″

Type T    Baash Ross Safety Clamp  –  Range 1-1/8″ – 4-1/2″

Mouse Hole Assembly & Rat Hole Assembly

Rat Hole Digger  –  Chain Drive Type

DRILL COLLARS

12 x 4-3/4 Drill Collars and X/over Subs.

19. SAFETY

1 Lot Fire Ansul Extinguishers for Rig and Camp

First Aid Kit

Four (4) Scott Air Pack, Mask with Bottle

Four (4) Spare Bottles for above

Four (4) Charging System for above

Six (6) H2S Monitors with alarm

One (1) Test Generator for above

20. SWABBING EQUIPMENT

Guiberson Type H Oil Saver

Complete with sinker bars, knuckle joints, Tubing Swab for 2-3/8″, 2-7/8″, 3-1/2″ Tbg. plus Jars And All Sizes of Swab Cups

21. CAMP ACCOMODATION AND ASSOCIATED EQUIPMENT

10′  x  24′   8-Man Sleepers

10′  x  24′   4-Man Sleepers

10′  x  24′   Bath / Toilet / Laundry

10′  x  24′   Cooler / Freezer

20′  x  24′   Diner

10′  x  24    Kitchen

Generator House

Raw Water Tank

Fresh Water Tank

Diesel Fuel Tank

Total for 40-Man Camp

22. RIG SITE ACCOMODATION

Two (2) Elder 2-Man Rig Manager Sleeper / Bath / Office  :

–   One each   Company Man

–   One each   Contractor’s Drilling Foreman

23. AUTOMOTIVE EQUIPMENT ATTACHED TO RIG

One (1)  Toyota Pick-Up assigned to Drilling Foreman

One (1)  Toyota Pick-Up assigned to Mechanic

One (1)  Toyota Station Wagon – Crew Car

One (1) each 953 Kenworth equipped with Winch and Ginpoles